Ask and Learn More Share and Gain



Use " " for precision search eg:"electronics seminar" , use -" " to filter something eg: "electronics seminar" -"/tag/"
Tags: Radio, Circuit, Audio, Filter, Project,
Ask More Info Of  A Seminar Ask More Info Of A Project Post Reply Follow us on Twitter
08-09-2009, 11:20 PM
Post: #1
Ham Radio Circuit Audio Filter Project
Introduction To Ham Radio Circuit Audio Filter

One of the earliest mode of radio communications is the use of Morse Code on a continuous wave carrier(CW) which is interrupted to generate a DIT and DAH in forming an alphabet. Though it looks simple, this method is often make less reliable as the surrounding man-made noise and atmospheric noise caused interference to the receiver station. This project will help to filter out the interference signal and ensure that the signal received from the Morse code station stand out.




Circuit Description





The schematic diagram of the filter circuit is simple and easy to build. It uses common parts that can be purchased easily from any electronic shops. At the core of the circuit is a OP AMP where its input is connected to the headphone jack of the receiver. Some of the amplified signal is feedback through potentiometer VR1 to the non inverting input which helps to boosts the gain and hence called postive feedback. Some is passed to the inverting input through a LC circuit. This cancels the gain of the amplifier except at the resonant frequency - high impedance at resonance state. The amount of positive feedback is adjusted using the potentiometer VR1.

L choke should be in the region of 5H but this is not critical. Try using the winding of an audio transformer to make this choke. The output of this filter is connected to the earphones. On Switch SW and on the radio. Vary the VR1 until it goes into oscillation and then turn it back a bit. Tune across the code station and you will hear a sharp peak response effectively cutting off other noise and interference.

Figure below shows the filter's selectivity response curve. It is sharp at the peak at 20dB at the audio frequency of 800kHz - 900kHz.

Please Use Search http://www.seminarprojects.com/search.php To Get More Information About

A Seminar Or Project Topic
Rating Ham Radio Circuit Audio Filter Project Options
Share Ham Radio Circuit Audio Filter Project To Your Friends :- Seminar Topics Bookmark
Post Reply 


[-]
Share/Bookmark (Show All)
Facebook Linkedin Technorati Twitter Digg MySpace Delicious

Possibly Related Threads...
Thread: Author Replies: Views: Last Post
  ZIGBEE BASED PROJECT electronics seminars 1 789 Today 11:09 AM
Last Post: Jinesh14
  project on cross platform ide for UNIX based C systems miran13 1 72 Today 07:59 AM
Last Post: hema manikhedkar
Sad civil project joseph david 4 389 Yesterday 07:23 PM
Last Post: farahshaheen47
  Audio Steganography project topics 1 327 Yesterday 02:13 PM
Last Post: lalithag
  blue brain project full report seminar topics 6 2,557 29-07-2010 06:33 PM
Last Post: projects wizhard
  availdoctors.com project report project topics 1 195 29-07-2010 03:19 PM
Last Post: somender123
  Diesel particulate filter nitsac 1 119 28-07-2010 07:15 PM
Last Post: chandranan3073
  scada and plc based project sameer546 5 437 28-07-2010 07:12 PM
Last Post: siddheshwar
  PROJECT OXYGEN (Download Full Report And Abstract) computer science crazy 7 1,062 28-07-2010 07:06 PM
Last Post: prabhatsingh2011@gmail.com
  AUDIO SPOT LIGHTING parvathy nair 0 23 28-07-2010 05:30 PM
Last Post: parvathy nair
This Page May Contain What is Ham Radio Circuit Audio Filter Project And Latest Information/News About Ham Radio Circuit Audio Filter Project,If Not ...Use Search to get more info about Ham Radio Circuit Audio Filter Project Or Ask Here


Archive Seminar Topics Bookmark Current time: 31-07-2010, 04:56 PM